- Phone: +49 3493 7540-0
- contact@polychem.de
German
English
Solvent-free acrylate adhesives
Our hotmelts are solvent-free systems, which are melted by the administration of heat and then applied. Depending on the requirement, either pure acrylate-based hot melts or formulations modified using resins and/or plasticisers can preferentially be used. The performance of our hot melts can be individually varied to fulfil the requirements for the relevant operating range. Please contact us for more detailed information on our product portfolio and the individual products.
| Product | Solids content [%] | Viscosity [Pas] @ 150 °C, 100/s |
|---|---|---|
| MELTIS® UV 204 | > 99% | 20…30 |
| MELTIS® UV 234 | > 99% | 30…45 |
| MELTIS® UV 250 | > 99% | 20…30 |
| MELTIS® UV 260 | > 99% | 20…30 |
| MELTIS® UV 285 | > 99% | 20…35 Pas |
| MELTIS® UV 505 | > 99% | 20…30 Pas |
| MELTIS® UV 3532 | > 99% | 5…35 Pas (@ 130 °C) |
| MELTIS® UV 9100 | > 99% | 15…25 (@ 100 °C) |
| MELTIS® 105 | > 99% | 20…30 (@ 23 °C, 20 rpm) |
| MELTIS® 125 | > 98% | 5…25 Pas (@ 50 °C) |
| MELTIS® 135 | > 98,5% | 25…55 (@ 23 °C, 20 rpm) |
Solids content [%]: > 99%
Viscosity [Pas] @ 150 °C, 100/s: 20…30
Solids content [%]: > 99%
Viscosity [Pas] @ 150 °C, 100/s: 30…45
Solids content [%]: > 99%
Viscosity [Pas] @ 150 °C, 100/s: 20…30
Solids content [%]: > 99%
Viscosity [Pas] @ 150 °C, 100/s: 20…30
Solids content [%]: > 99%
Viscosity [Pas] @ 150 °C, 100/s: 20…35 Pas
Solids content [%]: > 99%
Viscosity [Pas] @ 150 °C, 100/s: 20…30 Pas
Solids content [%]: > 99%
Viscosity [Pas] @ 150 °C, 100/s: 5…35 Pas (@ 130 °C)
Solids content [%]: > 99%
Viscosity [Pas] @ 150 °C, 100/s: 15…25 (@ 100 °C)
Solids content [%]: > 99%
Viscosity [Pas] @ 150 °C, 100/s: 20…30 (@ 23 °C, 20 rpm)
Solids content [%]: > 98%
Viscosity [Pas] @ 150 °C, 100/s: 5…25 Pas (@ 50 °C)
Solids content [%]: > 98,5%
Viscosity [Pas] @ 150 °C, 100/s: 25…55 (@ 23 °C, 20 rpm)
Contact person
Dr. Andreas Berndt